Name |
nside Diameter mm |
Performance and use |
Remarks |
Steam hose |
13-76 | Pipe saturation steam or overheating water below 170”ę. Work pressure: steam 0.35Mpa; overheating water 0.8Mpa. |
--- |
Oil piping hose |
13-152 | Pipe gas, lubricating oil and other mineral oil under the normal temperature. Work pressure: 0.5-1.2MPa |
Also used for external armored structure |
Food piping hose |
25-152 | Pipe mile, wine, cook oil and liquid drink. Work pressure: 0.5-0.8Mpa. |
”” |
Acid or alkali piping hose |
25-203 | Pipe thin acid or alkali solution. Work pressure: 0.5-0.7Mpa. |
If the thick acid is piped, the butyl rubber can be used as the inner layer and the fiberglass can be used as the fabric layers |
Wearing sand blast hose |
25-64 | Wind pressure sand blast hose. Work pressure: 0.6Mpa. |
The hose used for the cement tan car can be produced in this way. |
| Tank elbow pipe | 25-102 | Pipe water for the engine tank | ”” |
| Drilling hose | 51-102 |
With press resistance, wear resistance and oil resistance, the product is used as the connection for pelican neck tap and standpipe. |
With metal joints at both end |
| Nylon
fiber spiral Oxygen blowing hose |
51-127 | (Flexible connection of top blowing
pure Oxygen convertor. Work pressure 1.5Mpa. ) (Buckled Steel wire brailed type can be used,Work pressure 8Mpa.) |
With sulfuration metal flange and asbestos covering layer |
| Mud piping hose | 196-900 | Mud piping line of the dredger, work pressure 0.4-0.5Mpa. | With the flange joints in accordance with the request of the design |
| Hole making hose | 25£¬32£¬40 | Used for the hole making in the engineering construction such as bridges and roads. Tensile force: 1.5-2.30kg /each”£ | Out layer rubber with excellent tearing strength |